You can find them under the rubber caps on the right side of the device (we marked the caps with appropriate icons). The device is equipped with a microSD Card and USB (type C) ports. Battery run time is 18 hours on a single charge.Battery charging time (from 0 to 100%) is 6 hours with 2 A USB charger.Note using a wall charger with lower amperage will take longer to charge your scope. Plug the cable into a USB wall charger that has an output of 2 amps (Wall Charger not included).Ĭharge your scope for 6 hrs using a 2A USB wall charger. We have included a USB (type C) charging cable with your scope. You will find it under the rubber cap on the right side of the device (caps are marked with appropriate icon). The device is equipped with a USB (type C) port. If any accessories are missing or broken contact ATN’s Customer Service at 1.800.910.2862. Ensure that all optical surfaces are clean and ready for use.Inspect the device for damage to optical surfaces, body, eyecups, operation buttons, etc.Verify your box has the following: Optic, Optic Cover, Sunshade, Rubber Eye Piece, IR Illuminator (only with X-Sight 4K Pro), Rings (only with X-Sight 4K Pro), Charging Cable.Since the update to Chrome 61 today i have washed out colors on Websites (for example Twitch, the purple on the top is washed out) and heavy color Banding like on the displaycal websites the blue background shows heavy Banding.The following steps must be performed before using the device. Not sure if you’re the original reporter on the Chromium bug report, but in case you are, you are using a wide gamut display and your color managed (sRGB) colors are not “washed out”, they are now accurately displayed with the intended saturation. The display from the bug report is a laptop display, and needs a relatively strong correction on the neutral axis. Doing this in 8 bit, and the display then being (probably) 6 bit + dithering, leads to increased banding. No, I’m not the one from the Chromium Bug Report. I was searching google for that quite a bit and haven’t been able to find this Bug Report, 1st time reading it (looks like google can’t find stuff on its own sites :D). The problem is not related to Chrome or the profile, that much I can tell you.īut if this option is going to disappear with Chrome 62 how is it really solved? Is it an issue of Chrome, Displa圜al or both? I have a Benq XL2420G connected via Displayport for G-Sync compatibility, and the Display is sRGB.ĭisabling color correct rendering in chrome://flags solved the issue for me. But the display has a very unusual native response that looks similar to the DICOM curve used in medical imaging (with a very high midpoint gamma around 3.4). This means it needs a strong correction (brightening) of the midtones to reach the much lower 2.2 gamma. The native (uncorrected) display response greatly increases color contrast due to the native response having such a high gamma. The corrected response is much less contrasty. Yeah I know it needs strong correction, the Display is kinda unique because it has 2 different electronic circuits for standard mode and G-Sync Mode (it has a 1st gen G-Sync Module which only has 1 input and the display has additional inputs), and in G-Sync Mode the only options available are only 4 preset picture profiles to choose from as a starting point, I used the preset which had the most accurate colors out of the box.įor now the workaround with the Chrome flag works, I hope it gets sorted out before Chrome 62 releases without that flag.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |